Triton Elite Bottle - Mix and Match
Description
The Triton Elite Mix and Match is a 750ml drink bottle made from Tritan, a BPA-free plastic that resists odours, with a flip valve lid, straw and carry handle and a coloured silicone band around the neck. The bottle, lid and band can be mixed and matched in any colour combination from the palette at no extra cost. It holds cold drinks and is not made for hot or fizzy ones.
Branding can go on by full colour rotary digital print, a one-colour rotary screen print, or a pad print for a smaller logo. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
Product Details
- 750ml translucent drink bottle
- Odour-resistant BPA-free Tritan
- Flip valve lid with a straw and carry handle
- Mix and match bottle, lid and band colours at no extra cost
- Not suitable for hot drinks or carbonated drinks
- Rotary screen print, pad print and rotary digital print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print rolls a single solid colour onto the bottle through a fine mesh screen as it turns. It works best for bold logos and clear text rather than gradients or photographs, over a 60mm x 210mm area in one colour.
Rotary digital print puts full colour, gloss artwork onto the bottle with UV inkjet heads as it turns, so it can hold detailed logos, gradients and photographs in one pass with one setup regardless of colours. Metallic and neon colours cannot be reproduced, and because the print does not travel the whole way around, there is a small gap where it starts and ends. The print area is 80mm x 231mm.
Pad print applies your logo with a silicone pad lifted from an etched plate. It holds fine detail, down to about 0.4mm, and clean lines, so it works for smaller or more detailed logos. Each colour has its own setup, in a 45mm circle or a 50mm x 25mm area.
Material and Design
The Triton Elite Mix and Match is made from Tritan, a BPA-free, odour-resistant plastic. Its gloss, translucent finish lets the water level show at a glance, and since it does not pick up flavours or smells, a rinse has it ready to refill. The bottle, the solid polypropylene lid and the silicone band can each be chosen in a different colour and mixed and matched from the palette at no extra cost. The lid has a flip valve with a straw and a carry handle. At 750ml it holds a big drink for training, work or a day out.
Care and Use
Handwashing keeps the bottle and any print in good order. A dishwasher can distort the plastic and wear at the branding, so wash it by hand with warm water and a mild detergent and leave it to air dry with the lid open. Slide the straw out and rinse it so nothing is left behind. The bottle is for cold drinks only, not hot or carbonated ones.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Triton Elite Mix and Match is a 750ml drink bottle made from Tritan, a BPA-free plastic that resists odours, with a flip valve lid, straw and carry handle and a coloured silicone band around the neck. The bottle, lid and band can be mixed and matched in any colour combination from the palette at no extra cost. It holds cold drinks and is not made for hot or fizzy ones.
Branding can go on by full colour rotary digital print, a one-colour rotary screen print, or a pad print for a smaller logo. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 750ml translucent drink bottle
- Odour-resistant BPA-free Tritan
- Flip valve lid with a straw and carry handle
- Mix and match bottle, lid and band colours at no extra cost
- Not suitable for hot drinks or carbonated drinks
- Rotary screen print, pad print and rotary digital print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print rolls a single solid colour onto the bottle through a fine mesh screen as it turns. It works best for bold logos and clear text rather than gradients or photographs, over a 60mm x 210mm area in one colour.
Rotary digital print puts full colour, gloss artwork onto the bottle with UV inkjet heads as it turns, so it can hold detailed logos, gradients and photographs in one pass with one setup regardless of colours. Metallic and neon colours cannot be reproduced, and because the print does not travel the whole way around, there is a small gap where it starts and ends. The print area is 80mm x 231mm.
Pad print applies your logo with a silicone pad lifted from an etched plate. It holds fine detail, down to about 0.4mm, and clean lines, so it works for smaller or more detailed logos. Each colour has its own setup, in a 45mm circle or a 50mm x 25mm area.
Material and Design
The Triton Elite Mix and Match is made from Tritan, a BPA-free, odour-resistant plastic. Its gloss, translucent finish lets the water level show at a glance, and since it does not pick up flavours or smells, a rinse has it ready to refill. The bottle, the solid polypropylene lid and the silicone band can each be chosen in a different colour and mixed and matched from the palette at no extra cost. The lid has a flip valve with a straw and a carry handle. At 750ml it holds a big drink for training, work or a day out.
Care and Use
Handwashing keeps the bottle and any print in good order. A dishwasher can distort the plastic and wear at the branding, so wash it by hand with warm water and a mild detergent and leave it to air dry with the lid open. Slide the straw out and rinse it so nothing is left behind. The bottle is for cold drinks only, not hot or carbonated ones.
