Triton Bottle - Colour Match
Description
The Triton Colour Match is a 750ml drink bottle made from Tritan, a BPA-free plastic that resists odours. The bottle, flip spout and lid are all colour-matched, and the flip valve lid has a straw and a carry handle. It holds cold drinks and is not made for hot or fizzy ones.
Branding can go on by full colour rotary digital print, a one-colour rotary screen print, or a pad print for a smaller logo. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
Product Details
- 750ml translucent drink bottle
- Odour-resistant BPA-free Tritan
- Flip valve lid with a straw and carry handle
- Colour-matched bottle, spout and lid
- Not suitable for hot drinks or carbonated drinks
- Rotary screen print, pad print and rotary digital print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print wraps a single colour of solid ink around the bottle as it turns beneath a fine mesh screen, best for bold logos and clear lettering rather than gradients or photographs. It prints one colour over a 60mm x 210mm area.
Rotary digital print uses UV inkjet heads to lay full colour, gloss artwork onto the bottle as it turns, handling detailed logos, gradients and photographs in one pass with a single setup regardless of colours. Metallic and neon colours cannot be reproduced, and as the print does not fully wrap around, there is a small gap between its start and end. The print area is 80mm x 231mm.
Pad print presses ink onto the bottle from a silicone pad lifted from an etched plate. It holds fine detail, down to about 0.4mm, and lays clean, well-defined lines and text, which suits smaller or more detailed logos. Each colour needs its own setup, and it prints in a 45mm circle or a 50mm x 25mm area.
Material and Design
The Triton Colour Match is made from Tritan, a BPA-free, odour-resistant plastic. Its gloss, translucent finish lets the water level show at a glance, and since it does not pick up flavours or smells, a rinse has it ready to refill. The bottle, flip spout and lid are all colour-matched, and the lid has a flip valve with a straw and a carry handle. At 750ml it holds a big drink for training, work or a day out.
Care and Use
Handwashing is recommended to protect the bottle and any print, as a dishwasher can distort the plastic and wear at the branding, so wash it by hand with warm water and a mild detergent and air dry with the lid open. Pull the straw out and rinse it through so nothing is left inside. The bottle is for cold drinks only, not hot or carbonated ones.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Triton Colour Match is a 750ml drink bottle made from Tritan, a BPA-free plastic that resists odours. The bottle, flip spout and lid are all colour-matched, and the flip valve lid has a straw and a carry handle. It holds cold drinks and is not made for hot or fizzy ones.
Branding can go on by full colour rotary digital print, a one-colour rotary screen print, or a pad print for a smaller logo. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 750ml translucent drink bottle
- Odour-resistant BPA-free Tritan
- Flip valve lid with a straw and carry handle
- Colour-matched bottle, spout and lid
- Not suitable for hot drinks or carbonated drinks
- Rotary screen print, pad print and rotary digital print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print wraps a single colour of solid ink around the bottle as it turns beneath a fine mesh screen, best for bold logos and clear lettering rather than gradients or photographs. It prints one colour over a 60mm x 210mm area.
Rotary digital print uses UV inkjet heads to lay full colour, gloss artwork onto the bottle as it turns, handling detailed logos, gradients and photographs in one pass with a single setup regardless of colours. Metallic and neon colours cannot be reproduced, and as the print does not fully wrap around, there is a small gap between its start and end. The print area is 80mm x 231mm.
Pad print presses ink onto the bottle from a silicone pad lifted from an etched plate. It holds fine detail, down to about 0.4mm, and lays clean, well-defined lines and text, which suits smaller or more detailed logos. Each colour needs its own setup, and it prints in a 45mm circle or a 50mm x 25mm area.
Material and Design
The Triton Colour Match is made from Tritan, a BPA-free, odour-resistant plastic. Its gloss, translucent finish lets the water level show at a glance, and since it does not pick up flavours or smells, a rinse has it ready to refill. The bottle, flip spout and lid are all colour-matched, and the lid has a flip valve with a straw and a carry handle. At 750ml it holds a big drink for training, work or a day out.
Care and Use
Handwashing is recommended to protect the bottle and any print, as a dishwasher can distort the plastic and wear at the branding, so wash it by hand with warm water and a mild detergent and air dry with the lid open. Pull the straw out and rinse it through so nothing is left inside. The bottle is for cold drinks only, not hot or carbonated ones.
