Avana Bottle
Description
The Avana is a 650ml translucent drink bottle made from co-polyester, a BPA-free plastic that resists odours, set off by a band of polished stainless steel trim. Its screw-on lid flips up to a built-in straw for easy drinking and has a carry handle on top. It holds cold drinks and is not made for hot or fizzy ones.
The bottle is pad printed for a coloured logo, while the polished steel trim can be laser engraved to a natural etch for a permanent, hard-wearing mark, which is the more durable option. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
Product Details
- 650ml translucent drink bottle
- Odour-resistant BPA-free co-polyester
- Polished stainless steel trim
- Flip lid with a straw and carry handle
- Not suitable for hot drinks or carbonated drinks
- Pad print on the bottle, laser engraving on the steel trim
- Laser engraving on the trim is the durable option
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Pad print brands the bottle with a silicone pad. It handles the curved surface and holds fine detail down to about 0.4mm. On the clear bottle close PMS matches are achievable, while the blue and black bottles print best with a white under base. Each colour has its own setup, and solid colours reproduce better than halftones. Artwork should be vector, with fonts outlined. The print area is 35mm x 60mm.
Laser engraving is applied to the polished steel trim rather than the plastic, etching your design into the steel as a natural etch. This is a permanent tonal mark that will not fade or peel, which makes it the most hard-wearing option and the one we recommend for durability. The engraving area is 45mm x 18mm on the trim.
Material and Design
The Avana is made from co-polyester, a BPA-free plastic that resists odours, finished with a band of polished stainless steel trim around the top for a lift in look. The translucent finish lets the water level show at a glance, and the plastic does not take on flavours or smells, so a quick rinse leaves it ready for whatever you fill it with next. Its screw-on lid flips open to a straw and snaps closed between sips, with a carry handle on top. At 650ml it is a good everyday size for work, the gym or being out and about, and the polished steel trim gives it a solid, quality feel.
Care and Use
Handwashing is recommended to protect the bottle and any print. A dishwasher's heat and water jets can distort the plastic and wear at a pad printed logo, so wash it by hand with warm water and a mild detergent and let it air dry with the lid open. Pull the straw out and rinse it through so nothing is left inside. The bottle is made for cold drinks only, not hot liquids, and is not suitable for carbonated drinks.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Avana is a 650ml translucent drink bottle made from co-polyester, a BPA-free plastic that resists odours, set off by a band of polished stainless steel trim. Its screw-on lid flips up to a built-in straw for easy drinking and has a carry handle on top. It holds cold drinks and is not made for hot or fizzy ones.
The bottle is pad printed for a coloured logo, while the polished steel trim can be laser engraved to a natural etch for a permanent, hard-wearing mark, which is the more durable option. The bottle is supplied loose packed, and handwashing is recommended to preserve branding.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 650ml translucent drink bottle
- Odour-resistant BPA-free co-polyester
- Polished stainless steel trim
- Flip lid with a straw and carry handle
- Not suitable for hot drinks or carbonated drinks
- Pad print on the bottle, laser engraving on the steel trim
- Laser engraving on the trim is the durable option
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Pad print brands the bottle with a silicone pad. It handles the curved surface and holds fine detail down to about 0.4mm. On the clear bottle close PMS matches are achievable, while the blue and black bottles print best with a white under base. Each colour has its own setup, and solid colours reproduce better than halftones. Artwork should be vector, with fonts outlined. The print area is 35mm x 60mm.
Laser engraving is applied to the polished steel trim rather than the plastic, etching your design into the steel as a natural etch. This is a permanent tonal mark that will not fade or peel, which makes it the most hard-wearing option and the one we recommend for durability. The engraving area is 45mm x 18mm on the trim.
Material and Design
The Avana is made from co-polyester, a BPA-free plastic that resists odours, finished with a band of polished stainless steel trim around the top for a lift in look. The translucent finish lets the water level show at a glance, and the plastic does not take on flavours or smells, so a quick rinse leaves it ready for whatever you fill it with next. Its screw-on lid flips open to a straw and snaps closed between sips, with a carry handle on top. At 650ml it is a good everyday size for work, the gym or being out and about, and the polished steel trim gives it a solid, quality feel.
Care and Use
Handwashing is recommended to protect the bottle and any print. A dishwasher's heat and water jets can distort the plastic and wear at a pad printed logo, so wash it by hand with warm water and a mild detergent and let it air dry with the lid open. Pull the straw out and rinse it through so nothing is left inside. The bottle is made for cold drinks only, not hot liquids, and is not suitable for carbonated drinks.
