Cool Runner Backpack
Description
The Cool Runner is a 34 litre insulated cooler you wear, built from 600D polyester with a latex rubber backing. It carries on fully padded backpack shoulder straps and a padded back panel, leaving your hands free for everything else. The main compartment is PEVA lined with a protective baseboard to hold its shape when loaded, and rubber feet lift the base off the ground.
Two insulated holders on the outside keep drink bottles cool alongside the main compartment, an elastic bungee cord across the front takes a jacket or anything else you want to hand, and a Velcro wrap handle gives you a quick grab point. Branding can be applied by SupaColour full colour transfer or by embroidery, and the Cool Runner comes in black.
Additional Details
Branding Options
- SupaColour is a full colour heat transfer widely regarded as the best in the world. It combines screen and digital printing with a printed white base, so photographs, gradients and fine detail come through sharp and vibrant, and the colour holds against the black fabric. One setup covers the whole design however many colours it contains, and the print is hard-wearing and long-lasting. It is applied to the pocket over a 150mm x 105mm area.
- Embroidery stitches your design into the fabric in rayon thread, for a raised, textured finish with a depth and perceived value that printing cannot match. It is hard-wearing, and one setup covers up to twelve thread colours per position. Thread colours are matched to the nearest available shade from the thread chart, so it suits logos, lettering and solid shapes. It is stitched within an 80mm diameter circle.
Material and Design
The Cool Runner is built from 600D polyester with a latex rubber backing. The 600 denier rating puts the fabric in the hard-wearing grade used for luggage and outdoor gear, and the rubber backing seals the weave against water.
It carries as a backpack on fully padded shoulder straps and a padded back panel, with a Velcro wrap handle for grabbing it out of a boot. The main compartment is lined with PEVA, a food-safe, PVC-free lining, and a protective baseboard holds the shape when it is loaded. Rubber feet lift the base off the ground.
Two insulated holders sit on the outside for drink bottles, keeping them cool alongside the main compartment, and an elastic bungee cord across the front takes a jacket or anything else you want to hand. At 34 litres it swallows a full day of food and drinks.
Care and Use
Wipe the fabric and lining clean after use and let the pack air dry fully before storing.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Cool Runner is a 34 litre insulated cooler you wear, built from 600D polyester with a latex rubber backing. It carries on fully padded backpack shoulder straps and a padded back panel, leaving your hands free for everything else. The main compartment is PEVA lined with a protective baseboard to hold its shape when loaded, and rubber feet lift the base off the ground.
Two insulated holders on the outside keep drink bottles cool alongside the main compartment, an elastic bungee cord across the front takes a jacket or anything else you want to hand, and a Velcro wrap handle gives you a quick grab point. Branding can be applied by SupaColour full colour transfer or by embroidery, and the Cool Runner comes in black.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Additional Details
Branding Options
- SupaColour is a full colour heat transfer widely regarded as the best in the world. It combines screen and digital printing with a printed white base, so photographs, gradients and fine detail come through sharp and vibrant, and the colour holds against the black fabric. One setup covers the whole design however many colours it contains, and the print is hard-wearing and long-lasting. It is applied to the pocket over a 150mm x 105mm area.
- Embroidery stitches your design into the fabric in rayon thread, for a raised, textured finish with a depth and perceived value that printing cannot match. It is hard-wearing, and one setup covers up to twelve thread colours per position. Thread colours are matched to the nearest available shade from the thread chart, so it suits logos, lettering and solid shapes. It is stitched within an 80mm diameter circle.
Material and Design
The Cool Runner is built from 600D polyester with a latex rubber backing. The 600 denier rating puts the fabric in the hard-wearing grade used for luggage and outdoor gear, and the rubber backing seals the weave against water.
It carries as a backpack on fully padded shoulder straps and a padded back panel, with a Velcro wrap handle for grabbing it out of a boot. The main compartment is lined with PEVA, a food-safe, PVC-free lining, and a protective baseboard holds the shape when it is loaded. Rubber feet lift the base off the ground.
Two insulated holders sit on the outside for drink bottles, keeping them cool alongside the main compartment, and an elastic bungee cord across the front takes a jacket or anything else you want to hand. At 34 litres it swallows a full day of food and drinks.
Care and Use
Wipe the fabric and lining clean after use and let the pack air dry fully before storing.
