Frontier Challenger Cooler Totepack
Description
The Frontier Challenger Cooler Totepack is a 15L cooler totepack made from two-tone water-resistant tarpaulin with a polyester front pocket. It has PE foam insulation, a water-resistant PEVA lining, flat fold-down top, snap-release buckles and a 200mm depth.
The front slip pocket provides the decoration area for custom branding, with Colourflex Transfer, Faux Embroidery and DigiFlex Transfer available. It also includes padded carry straps, a 220mm handle length and a Frontier branded hangtag.
Product Details
- 15L cooler totepack made from water-resistant tarpaulin
- Two-tone outer shell with 200mm depth
- PE foam insulation inside the main compartment
- Water-resistant PEVA lining
- Flat fold-down top with snap-release buckles
- Front slip pocket, H 23cm x W 17cm
- Padded carry straps for hands-free carrying
- 220mm handle and 840mm extended strap length
- Presented with a Frontier branded hangtag
| Dimension | Value |
|---|---|
| Length | 51cm |
| Width | 43cm |
| Height | 45cm |
| Weight | 9kg |
| Quantity | 10 |
| Packaging | Loose packed |
| Dimension | Value |
|---|---|
| Length | 51cm |
| Width | 43cm |
| Height | 45cm |
| Weight | 9kg |
| Quantity | 10 |
| Packaging | Loose packed |
Additional Details
Branding Options
Colourflex Transfer: Maximum branding area is 100mm x 130mm. Colourflex Transfer is a CMYK+W digital print process used for fabric branding. It is ideal for full-colour logos, complex artwork and approximate spot colour branding, producing a high-definition vibrant matt finish. Only one setup charge is required regardless of print colours, although metallic, neon and fluorescent colours cannot be reproduced.
Faux Embroidery: Maximum branding area is 100mm x 130mm. Faux Embroidery is a Colourflex Transfer where artwork is digitised to create texture and depth that mimics embroidery. It is suitable for bold, larger artwork and can be better than conventional embroidery for smaller prints. Limitations include no Pantone matching, reduced stitch clarity at smaller sizes, no metallic colours and poor suitability for fine detail.
DigiFlex Transfer: Maximum branding area is 100mm x 130mm. DigiFlex Transfer is a DTF direct-to-film digital transfer process for fabric branding. It is economical for short runs and suitable for personalisation or variable data when available. It uses water-based inks and only needs one setup regardless of print colours, with limitations including no metallic, neon or fluorescent colours and minimum detail around 1mm.
Cooler Construction
The Frontier Challenger Cooler Totepack has a water-resistant tarpaulin outer shell, polyester front pocket and polyester webbing. The main compartment uses PE foam insulation with a water-resistant PEVA lining. It measures 380mm high x 320mm wide x 200mm deep when closed, excluding straps, and has a flat fold-down top with snap-release buckles.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Frontier Challenger Cooler Totepack is a 15L cooler totepack made from two-tone water-resistant tarpaulin with a polyester front pocket. It has PE foam insulation, a water-resistant PEVA lining, flat fold-down top, snap-release buckles and a 200mm depth.
The front slip pocket provides the decoration area for custom branding, with Colourflex Transfer, Faux Embroidery and DigiFlex Transfer available. It also includes padded carry straps, a 220mm handle length and a Frontier branded hangtag.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 15L cooler totepack made from water-resistant tarpaulin
- Two-tone outer shell with 200mm depth
- PE foam insulation inside the main compartment
- Water-resistant PEVA lining
- Flat fold-down top with snap-release buckles
- Front slip pocket, H 23cm x W 17cm
- Padded carry straps for hands-free carrying
- 220mm handle and 840mm extended strap length
- Presented with a Frontier branded hangtag
| Dimension | Value |
|---|---|
| Length | 51cm |
| Width | 43cm |
| Height | 45cm |
| Weight | 9kg |
| Quantity | 10 |
| Packaging | Loose packed |
| Dimension | Value |
|---|---|
| Length | 51cm |
| Width | 43cm |
| Height | 45cm |
| Weight | 9kg |
| Quantity | 10 |
| Packaging | Loose packed |
Additional Details
Branding Options
Colourflex Transfer: Maximum branding area is 100mm x 130mm. Colourflex Transfer is a CMYK+W digital print process used for fabric branding. It is ideal for full-colour logos, complex artwork and approximate spot colour branding, producing a high-definition vibrant matt finish. Only one setup charge is required regardless of print colours, although metallic, neon and fluorescent colours cannot be reproduced.
Faux Embroidery: Maximum branding area is 100mm x 130mm. Faux Embroidery is a Colourflex Transfer where artwork is digitised to create texture and depth that mimics embroidery. It is suitable for bold, larger artwork and can be better than conventional embroidery for smaller prints. Limitations include no Pantone matching, reduced stitch clarity at smaller sizes, no metallic colours and poor suitability for fine detail.
DigiFlex Transfer: Maximum branding area is 100mm x 130mm. DigiFlex Transfer is a DTF direct-to-film digital transfer process for fabric branding. It is economical for short runs and suitable for personalisation or variable data when available. It uses water-based inks and only needs one setup regardless of print colours, with limitations including no metallic, neon or fluorescent colours and minimum detail around 1mm.
Cooler Construction
The Frontier Challenger Cooler Totepack has a water-resistant tarpaulin outer shell, polyester front pocket and polyester webbing. The main compartment uses PE foam insulation with a water-resistant PEVA lining. It measures 380mm high x 320mm wide x 200mm deep when closed, excluding straps, and has a flat fold-down top with snap-release buckles.