X-Stream Shot Bottle
Description
The X-Stream Shot is a 750ml sports bottle made from soft, food-grade LDPE, built to give a bigger drink for longer rides and training. Its lid carries the patented X-Stream valve, which you drink from with a squeeze or a sip and which seals itself shut afterwards, so it will not drip or leak on the bike or in a bag. It is not suitable for fizzy drinks.
Bottle and lid can be matched in any colour pairing from the standard range at no extra cost, ready for club or team colours, and your logo is wrapped around it by rotary screen print. It is supplied loose packed, and handwashing is recommended to preserve branding.
Product Details
- 750ml squeeze sports drink bottle
- Food-grade BPA-free LDPE
- Lightweight and easy to squeeze
- X-Stream non-drip self-sealing valve lid
- Mix and match bottle and lid colours at no extra cost
- Not suitable for carbonated drinks
- Rotary screen print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print pushes ink through a fine mesh screen onto the bottle while it spins, laying a solid colour around it. It is best kept for bold logos and clean lettering rather than photographs or gradients. More than one colour can be run, each needing its own setup, and the print area follows the supplied template.
Material and Design
The X-Stream Shot is moulded from food-grade LDPE, a soft, BPA-free plastic with a matt finish. It is light and the soft walls squeeze easily for a drink. The screw-on lid holds the patented X-Stream valve: you drink through it with a squeeze or a sip, and it seals itself the moment you stop, so it will not drip or spray even when it is squashed in a packed bag. There is no spout to pull up, so it is easy to drink from one-handed on the move, and because the valve closes over there is nothing left open for dust or grit to get into. At 750ml it carries a big drink, so there are fewer stops to refill on a long ride, a run of drills or a full training session, and it fits a standard bottle cage or holder. The bottle and lid can be paired in any colour combination from the standard range at no extra cost, and LDPE can be recycled at the end of its life.
Care and Use
Handwashing is recommended to look after the bottle and the print. A dishwasher's heat and water jets can soften the plastic and fade the branding, so clean it by hand with warm water and a mild detergent and stand it to dry with the lid off. Open the valve and rinse it through every so often so it stays clear and keeps sealing cleanly. Like other squeeze bottles it is not suitable for carbonated drinks, as the pressure they build is too much for it.
The Promovision Way
Price Beat Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The X-Stream Shot is a 750ml sports bottle made from soft, food-grade LDPE, built to give a bigger drink for longer rides and training. Its lid carries the patented X-Stream valve, which you drink from with a squeeze or a sip and which seals itself shut afterwards, so it will not drip or leak on the bike or in a bag. It is not suitable for fizzy drinks.
Bottle and lid can be matched in any colour pairing from the standard range at no extra cost, ready for club or team colours, and your logo is wrapped around it by rotary screen print. It is supplied loose packed, and handwashing is recommended to preserve branding.
The Promovision Way
Price Beat Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 750ml squeeze sports drink bottle
- Food-grade BPA-free LDPE
- Lightweight and easy to squeeze
- X-Stream non-drip self-sealing valve lid
- Mix and match bottle and lid colours at no extra cost
- Not suitable for carbonated drinks
- Rotary screen print branding
- Not dishwasher safe, handwash only to preserve branding
- Loose packed
Additional Details
Branding Options
Rotary screen print pushes ink through a fine mesh screen onto the bottle while it spins, laying a solid colour around it. It is best kept for bold logos and clean lettering rather than photographs or gradients. More than one colour can be run, each needing its own setup, and the print area follows the supplied template.
Material and Design
The X-Stream Shot is moulded from food-grade LDPE, a soft, BPA-free plastic with a matt finish. It is light and the soft walls squeeze easily for a drink. The screw-on lid holds the patented X-Stream valve: you drink through it with a squeeze or a sip, and it seals itself the moment you stop, so it will not drip or spray even when it is squashed in a packed bag. There is no spout to pull up, so it is easy to drink from one-handed on the move, and because the valve closes over there is nothing left open for dust or grit to get into. At 750ml it carries a big drink, so there are fewer stops to refill on a long ride, a run of drills or a full training session, and it fits a standard bottle cage or holder. The bottle and lid can be paired in any colour combination from the standard range at no extra cost, and LDPE can be recycled at the end of its life.
Care and Use
Handwashing is recommended to look after the bottle and the print. A dishwasher's heat and water jets can soften the plastic and fade the branding, so clean it by hand with warm water and a mild detergent and stand it to dry with the lid off. Open the valve and rinse it through every so often so it stays clear and keeps sealing cleanly. Like other squeeze bottles it is not suitable for carbonated drinks, as the pressure they build is too much for it.
