Colton Cooler Bag
Description
The Colton Cooler Bag is a 19L insulated cooler bag made from natural 100% 450gsm cotton canvas with leather-look PU accents. It has PE foam insulation, a PEVA inner liner, zippered top closure, piping details, 220mm depth and a large front slip pocket.
This product is part of the Impact Aware Collection because it is made with both natural and recycled materials. Branding options include Colourflex Transfer, Embroidery, Faux Embroidery and DigiFlex Transfer across the supplier-confirmed decoration areas.
Product Details
- 19L insulated cooler bag with 220mm depth
- Natural 100% 450gsm cotton canvas outer
- PE foam insulation inside the main compartment
- PEVA inner liner
- Leather-look PU accents
- Zippered top closure with piping details
- Large front slip pocket for storage and branding
- Top woven carry handle and removable shoulder strap
- Part of Impact Aware Collection for natural and recycled materials
Additional Details
Branding Options
Colourflex Transfer: Maximum branding area is 180mm x 130mm. Colourflex Transfer is a CMYK+W digital print process used for fabric branding. It is ideal for full-colour logos, complex artwork and approximate spot colour branding, producing a high-definition vibrant matt finish. Only one setup charge is required regardless of print colours, although metallic, neon and fluorescent colours cannot be reproduced.
Embroidery: Maximum embroidery area is 90mm circle. Embroidery uses rayon thread stitched into the product, creating a slightly raised finish and a higher perceived branding value. It has one setup charge per position for up to 12 thread colours. PMS colour matches are approximate, variable data is not available and fine detail should be avoided.
Faux Embroidery: Maximum branding area is 180mm x 130mm. Faux Embroidery is a Colourflex Transfer where artwork is digitised to create texture and depth that mimics embroidery. It is suitable for bold, larger artwork and can be better than conventional embroidery for smaller prints. Limitations include no Pantone matching, reduced stitch clarity at smaller sizes, no metallic colours and poor suitability for fine detail.
DigiFlex Transfer: Maximum branding area is 180mm x 130mm. DigiFlex Transfer is a DTF direct-to-film digital transfer process for fabric branding. It is economical for short runs and suitable for personalisation or variable data when available. It uses water-based inks and only needs one setup regardless of print colours, with limitations including no metallic, neon or fluorescent colours and minimum detail around 1mm.
Cooler Construction
The Colton Cooler Bag has a natural cotton canvas outer, PE foam insulation and a PEVA inner liner. It measures 300mm high x 300mm wide x 220mm deep and includes a woven carry handle, adjustable removable shoulder strap with metal clips, leather-look PU accents, piping details and a large front slip pocket.
Impact Aware
Impact Aware is a collection of products chosen for a lower impact on people and the planet. Every product in the range meets at least one of three criteria: it is made with recycled materials, it is made with natural materials, or it comes from a brand that gives back.
This product: Made with Recycled and Natural Materials.
Made with Recycled Materials
These products reuse materials that already exist, such as recycled plastic, paper, fabric or metal. This means less new material is needed, and existing material stays in use for longer. Examples include RPET and recycled stainless steel.
Made with Natural Materials
These products use renewable materials such as cotton, jute, bamboo or paper, which come from nature and can grow again.
Brands that Give Back
These products come from partner brands that build giving into the way they work, supporting communities, good causes or environmental programmes.
The Promovision Way
Price Beat Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Colton Cooler Bag is a 19L insulated cooler bag made from natural 100% 450gsm cotton canvas with leather-look PU accents. It has PE foam insulation, a PEVA inner liner, zippered top closure, piping details, 220mm depth and a large front slip pocket.
This product is part of the Impact Aware Collection because it is made with both natural and recycled materials. Branding options include Colourflex Transfer, Embroidery, Faux Embroidery and DigiFlex Transfer across the supplier-confirmed decoration areas.
The Promovision Way
Price Beat Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- 19L insulated cooler bag with 220mm depth
- Natural 100% 450gsm cotton canvas outer
- PE foam insulation inside the main compartment
- PEVA inner liner
- Leather-look PU accents
- Zippered top closure with piping details
- Large front slip pocket for storage and branding
- Top woven carry handle and removable shoulder strap
- Part of Impact Aware Collection for natural and recycled materials
Additional Details
Branding Options
Colourflex Transfer: Maximum branding area is 180mm x 130mm. Colourflex Transfer is a CMYK+W digital print process used for fabric branding. It is ideal for full-colour logos, complex artwork and approximate spot colour branding, producing a high-definition vibrant matt finish. Only one setup charge is required regardless of print colours, although metallic, neon and fluorescent colours cannot be reproduced.
Embroidery: Maximum embroidery area is 90mm circle. Embroidery uses rayon thread stitched into the product, creating a slightly raised finish and a higher perceived branding value. It has one setup charge per position for up to 12 thread colours. PMS colour matches are approximate, variable data is not available and fine detail should be avoided.
Faux Embroidery: Maximum branding area is 180mm x 130mm. Faux Embroidery is a Colourflex Transfer where artwork is digitised to create texture and depth that mimics embroidery. It is suitable for bold, larger artwork and can be better than conventional embroidery for smaller prints. Limitations include no Pantone matching, reduced stitch clarity at smaller sizes, no metallic colours and poor suitability for fine detail.
DigiFlex Transfer: Maximum branding area is 180mm x 130mm. DigiFlex Transfer is a DTF direct-to-film digital transfer process for fabric branding. It is economical for short runs and suitable for personalisation or variable data when available. It uses water-based inks and only needs one setup regardless of print colours, with limitations including no metallic, neon or fluorescent colours and minimum detail around 1mm.
Cooler Construction
The Colton Cooler Bag has a natural cotton canvas outer, PE foam insulation and a PEVA inner liner. It measures 300mm high x 300mm wide x 220mm deep and includes a woven carry handle, adjustable removable shoulder strap with metal clips, leather-look PU accents, piping details and a large front slip pocket.
Impact Aware
Impact Aware is a collection of products chosen for a lower impact on people and the planet. Every product in the range meets at least one of three criteria: it is made with recycled materials, it is made with natural materials, or it comes from a brand that gives back.
This product: Made with Recycled and Natural Materials.
Made with Recycled Materials
These products reuse materials that already exist, such as recycled plastic, paper, fabric or metal. This means less new material is needed, and existing material stays in use for longer. Examples include RPET and recycled stainless steel.
Made with Natural Materials
These products use renewable materials such as cotton, jute, bamboo or paper, which come from nature and can grow again.
Brands that Give Back
These products come from partner brands that build giving into the way they work, supporting communities, good causes or environmental programmes.
