Monsoon Umbrella
Description
This Monsoon Umbrella is a stylish, full-size umbrella with a large 190T pongee canopy and a colour edge trim. It opens with a convenient push-button, and is supported by a fibreglass shaft and ribs measuring 77cm including tips. The handle is a comfortable EVA foam grip. Opened out, it measures 1350mm across and 1000mm long including the handle.
Branding is available on the canopy, though the panel with the tie cannot be branded. Screen print branding is limited to one colour, with an area up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm. Colourflex Transfer and DigiFlex Transfer both support full colour designs in the same area. Individual names can be added using DigiFlex Transfer at additional cost. The umbrella comes loose packed.
Product Details
- Stylish umbrella with a large 190T pongee canopy
- Colour edge trim along the canopy
- Push-button opening
- Fibreglass shaft and ribs, 77cm including tips
- Comfortable EVA foam handle
- Opens to 1350mm across and 1000mm long, including the handle
- Screen print, Colourflex or DigiFlex branding
- Loose packed
Additional Details
Branding Options
The panel with the tie cannot be branded, across all methods below.
Screen Print
Screen printing forces ink through a fine mesh screen onto the canopy with a squeegee. This umbrella's screen print option is limited to one colour. It suits bold, simple logos best. One setup charge applies. Variable data is not available. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
Colourflex Transfer
Colourflex is a CMYK plus white digital transfer process suited to full colour, detailed designs and approximate spot colours. It uses water based inks and gives a durable, soft touch matt finish that is machine washable. Metallic and neon colours cannot be reproduced, and minimum detail is 1mm. One setup charge applies. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
DigiFlex Transfer
DigiFlex Transfer is a direct to film digital process suited to personalisation and variable data such as names. It uses water based inks and gives a durable, machine washable finish. Metallic and neon colours cannot be reproduced, and minimum detail is 1mm. One setup charge applies. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
Materials
The canopy is made from pongee, a lightweight, tightly woven fabric with a colour edge trim along its length. It's supported by a fibreglass shaft and ribs, valued for their flexibility and light weight, measuring 77cm including tips and finished in polypropylene. The handle is an EVA foam grip, giving a comfortable, non-slip hold, and the canopy opens with a convenient push-button action.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
This Monsoon Umbrella is a stylish, full-size umbrella with a large 190T pongee canopy and a colour edge trim. It opens with a convenient push-button, and is supported by a fibreglass shaft and ribs measuring 77cm including tips. The handle is a comfortable EVA foam grip. Opened out, it measures 1350mm across and 1000mm long including the handle.
Branding is available on the canopy, though the panel with the tie cannot be branded. Screen print branding is limited to one colour, with an area up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm. Colourflex Transfer and DigiFlex Transfer both support full colour designs in the same area. Individual names can be added using DigiFlex Transfer at additional cost. The umbrella comes loose packed.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- Stylish umbrella with a large 190T pongee canopy
- Colour edge trim along the canopy
- Push-button opening
- Fibreglass shaft and ribs, 77cm including tips
- Comfortable EVA foam handle
- Opens to 1350mm across and 1000mm long, including the handle
- Screen print, Colourflex or DigiFlex branding
- Loose packed
Additional Details
Branding Options
The panel with the tie cannot be branded, across all methods below.
Screen Print
Screen printing forces ink through a fine mesh screen onto the canopy with a squeegee. This umbrella's screen print option is limited to one colour. It suits bold, simple logos best. One setup charge applies. Variable data is not available. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
Colourflex Transfer
Colourflex is a CMYK plus white digital transfer process suited to full colour, detailed designs and approximate spot colours. It uses water based inks and gives a durable, soft touch matt finish that is machine washable. Metallic and neon colours cannot be reproduced, and minimum detail is 1mm. One setup charge applies. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
DigiFlex Transfer
DigiFlex Transfer is a direct to film digital process suited to personalisation and variable data such as names. It uses water based inks and gives a durable, machine washable finish. Metallic and neon colours cannot be reproduced, and minimum detail is 1mm. One setup charge applies. Branding area is up to 250mm wide at the bottom, tapering to 200mm at the top, over a height of 200mm.
Materials
The canopy is made from pongee, a lightweight, tightly woven fabric with a colour edge trim along its length. It's supported by a fibreglass shaft and ribs, valued for their flexibility and light weight, measuring 77cm including tips and finished in polypropylene. The handle is an EVA foam grip, giving a comfortable, non-slip hold, and the canopy opens with a convenient push-button action.
