Graphene Puffer Jacket
Description
The Graphene Puffer Jacket has a polyester stretch shell laminated with tricot and membrane, fully padded in soft polyfill with a graphene-infused lining for extra warmth and insulation. It's rated to 3000mm waterproof and UPF 50+, complying with AS 4399:2020.
Branding is available using embroidery, with access at the front placket. Side pockets have zip closures and a brushed fleece pocket bag to keep hands warm, with internal stretch sleeve cuffs and interchangeable zip pullers in a range of colours. Sizes run from 2XS to 5XL.
Product Details
- Polyester stretch shell laminated with tricot and membrane
- Graphene-infused lining boosts warmth and insulation
- Waterproof rating 3000mm, UPF 50+ (AS 4399:2020)
- Fully padded in soft polyfill
- Internal stretch sleeve cuffs
- Side pockets with zip closure and fleece pocket bag
- Interchangeable zip pullers in a range of colours
- Sizes 2XS to 5XL
- Loose packed
Additional Details
Fabric and Technology
The shell is a polyester stretch fabric laminated with tricot and a waterproof membrane, rated to 3000mm, with an urban fit that works equally well outdoors or around town. A graphene-infused coating on the lining boosts warmth retention, helping with insulation and heat regulation in cold conditions. The jacket is fully padded in soft polyfill and meets AS 4399:2020 for UPF 50+ sun protection.
Fit and Care
Wash the Graphene Puffer Jacket cold on a gentle cycle, no warmer than 30 degrees, with zips closed. Use a mild detergent rather than fabric softener or bleach, which can affect the waterproof membrane. Skip the tumble dryer and iron, and hang to dry.
Pockets and Comfort
Side pockets close with a zip and are lined with a brushed fleece pocket bag, giving a warm spot for hands in cold weather. Internal stretch sleeve cuffs help seal out draughts at the wrists, while interchangeable zip pullers let you customise the look with a range of colours.
Branding methods
Embroidery
Embroidery is an excellent way of branding apparel, offering higher perceived value and a depth of branding quality other processes cannot match. Embroidery uses rayon thread which is stitched into the product and has a slightly raised effect. Access for embroidery on the Graphene Puffer Jacket is via the front placket. Branding area is 100mm x 100mm.
Advantages
Only one setup charge applies per position for up to 12 thread colours.
Limitations
Only approximate PMS colour matches are possible, taken from our thread colour chart for the closest possible match.
Unable to print variable data such as individual naming.
Metallic embroidery colours have special pricing.
Artwork Requirements
Artwork must be supplied in editable vector format, with fonts converted to outlines to avoid font conflicts.
Minimum text height is 4.5mm for sans serif fonts and 5.5mm for serif fonts.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Description
The Graphene Puffer Jacket has a polyester stretch shell laminated with tricot and membrane, fully padded in soft polyfill with a graphene-infused lining for extra warmth and insulation. It's rated to 3000mm waterproof and UPF 50+, complying with AS 4399:2020.
Branding is available using embroidery, with access at the front placket. Side pockets have zip closures and a brushed fleece pocket bag to keep hands warm, with internal stretch sleeve cuffs and interchangeable zip pullers in a range of colours. Sizes run from 2XS to 5XL.
The Promovision Way
Best Price Guarantee
Fast Same-Day Quotes & Mock-Ups
Free Artwork & Unlimited Revisions
Product Details
- Polyester stretch shell laminated with tricot and membrane
- Graphene-infused lining boosts warmth and insulation
- Waterproof rating 3000mm, UPF 50+ (AS 4399:2020)
- Fully padded in soft polyfill
- Internal stretch sleeve cuffs
- Side pockets with zip closure and fleece pocket bag
- Interchangeable zip pullers in a range of colours
- Sizes 2XS to 5XL
- Loose packed
Additional Details
Fabric and Technology
The shell is a polyester stretch fabric laminated with tricot and a waterproof membrane, rated to 3000mm, with an urban fit that works equally well outdoors or around town. A graphene-infused coating on the lining boosts warmth retention, helping with insulation and heat regulation in cold conditions. The jacket is fully padded in soft polyfill and meets AS 4399:2020 for UPF 50+ sun protection.
Fit and Care
Wash the Graphene Puffer Jacket cold on a gentle cycle, no warmer than 30 degrees, with zips closed. Use a mild detergent rather than fabric softener or bleach, which can affect the waterproof membrane. Skip the tumble dryer and iron, and hang to dry.
Pockets and Comfort
Side pockets close with a zip and are lined with a brushed fleece pocket bag, giving a warm spot for hands in cold weather. Internal stretch sleeve cuffs help seal out draughts at the wrists, while interchangeable zip pullers let you customise the look with a range of colours.
Branding methods
Embroidery
Embroidery is an excellent way of branding apparel, offering higher perceived value and a depth of branding quality other processes cannot match. Embroidery uses rayon thread which is stitched into the product and has a slightly raised effect. Access for embroidery on the Graphene Puffer Jacket is via the front placket. Branding area is 100mm x 100mm.
Advantages
Only one setup charge applies per position for up to 12 thread colours.
Limitations
Only approximate PMS colour matches are possible, taken from our thread colour chart for the closest possible match.
Unable to print variable data such as individual naming.
Metallic embroidery colours have special pricing.
Artwork Requirements
Artwork must be supplied in editable vector format, with fonts converted to outlines to avoid font conflicts.
Minimum text height is 4.5mm for sans serif fonts and 5.5mm for serif fonts.